Other Gear https://www.bluewatercruising.org/forums/topics.aspx?forum=140120 Sat, 13 Jun 2026 11:57:57 GMT Tue, 2 Jun 2026 18:39:32 GMT Copyright © 2026 Bluewater Cruising Association Hydrovane for Sale https://www.bluewatercruising.org/forums/posts.aspx?topic=1855501 https://www.bluewatercruising.org/forums/posts.aspx?topic=1855501 Greetings all,

As I mentioned in another recent post, we have recently acquired a Nauticat 32. What didn't get mentioned last time is that we bought her from a remarkable sailor who was preparing her for his next single-handed circumnavigation, - even though he was in his 90s.  One of the key pieces of offshore gear he added was a hydrovane.  This is a wonderful piece of kit, but far beyond our needs.  Our respected predecessor ran into some health issues before casting off, so my understanding is that the hydrovane has never been used on the deep sea, and I'm not even sure that it had a sea trial in its local waters.  However, it has been baked in the Texas sun for something like 5 years, and a neighbour had an awkward docking experience that led to a "good-as-new" repair in 2023.  

Looking at current pricing, a new one appears to sell for over $8,500 CAD, before tax.  For us, clear access to the steps on our sugar-scoop stern will be more helpful than a Hydrovane.  Besides, this classy device deserves to be on a boat headed for blue water.  

Because of the age, sun, and (successful) repair, we propose a 1/2 new cost asking price of $4,250 CAD. We would consider offers, and might consider a trade for a quality hypalon inflatable.

Happy sailing!

Jim & Anne

S.V. Suksma

]]> Tue, 2 Jun 2026 19:39:32 GMT 16,000 BTU Dometic Air Conditioner for sale https://www.bluewatercruising.org/forums/posts.aspx?topic=1855093 https://www.bluewatercruising.org/forums/posts.aspx?topic=1855093 We purchased a Nauticat 32 in Texas, where air conditioning is a must.  The listing described the A/C  unit as "New".  It sure didn't look like that to us!  But it certainly did work every time & when we last tried it.  However, now that we are in BC, we need the space for other gear much more than we need an air conditioner.  I'd guess the basic gear was worth ~ $4k+ USD before extra bits and installation.  If someone is heading South and has the desire and room for A/C, we are quite open to offers.

We also are willing to part with a Hydrovane c/w an "A" bracket, but that is a story for another post.

Happy sailing!

]]> Fri, 29 May 2026 04:47:33 GMT (Brand New) French Courtesy Flag 12" x 18" - $10 https://www.bluewatercruising.org/forums/posts.aspx?topic=1852686 https://www.bluewatercruising.org/forums/posts.aspx?topic=1852686 Brand new French (France / French Polynesia / New Caledonia etc. ) Courtesy Flag - perfect for sailors planning a trans-Pacific trip. Ideal size for courtesy flags for vessels of most sizes (12" x 18"). Has brass grommets that allow it to easily be attached to flag halyards. Condition: new, only took out of package for photo Price: $10 ($15 on Amazon) Available in Nanaimo or can bring to Victoria if you'd prefer. Please feel free to contact me if you have any questions or want to set up a time to come by to check it out.]]> Thu, 30 Apr 2026 07:01:35 GMT Magnum 5-Ton Quick Change Triple and Twin Gear / Propeller Puller - $50 https://www.bluewatercruising.org/forums/posts.aspx?topic=1852685 https://www.bluewatercruising.org/forums/posts.aspx?topic=1852685 Excellent powerful gear / propeller puller. Only used once to pull a press-fit propeller off an old propeller shaft and it worked perfectly. Jaws still in perfect condition. Manufacturers Description: Freeing seized gears and pulleys from shafts requires straight, even pulling power to avoid binding or shattering expensive components. This 5-ton quick change triple and twin puller provides serious mechanical muscle for the toughest extraction tasks. Its innovative quick-change design allows mechanics to instantly swap between two-jaw and three-jaw setups depending on the space available and the grip needed, maximizing efficiency in tight engine bays. Features 5-ton pulling capacity - provides the immense mechanical advantage required to pop loose heavily seized gears and pulleys. Quick-change head - allows fast, tool-free switching between 2-jaw and 3-jaw configurations to match the job at hand. Reversible jaw hooks - allows the user to easily switch between inside and outside pulling grips for maximum versatility. Specifications -Pulling Capacity: 5 Tons Common Shop Applications -Removing pressed-on power steering pump pulleys. -Extracting harmonic balancers without tapped holes. -Pulling stubborn gears off transmission main shafts. Price: $60 (worth $90 + tax new) Available in Nanaimo or can bring to Victoria if you'd prefer. Please feel free to contact me if you have any questions or want to set up a time to come by to check it out. ]]> Thu, 30 Apr 2026 05:48:11 GMT Seadog Impeller Puller - $65 https://www.bluewatercruising.org/forums/posts.aspx?topic=1852406 https://www.bluewatercruising.org/forums/posts.aspx?topic=1852406 Great impeller puller for many marine or industrial engines. A must have tool for most cruisers - makes removing impellers quick and easy and avoids damaging your water pump or impellers when removing them to inspect or replace them. Model: 660040 for impellers 2-1/4" to 2-9/16" in diameter. Manufacturers Description: Impeller Pullers allow easier removal of flexible impellers from pumps. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump. Constructed of corrosion resistant investment cast 316 stainless steel. Comparable to Jabsco® #50070-0040 and #50070-0200. Price: $65 Available in Nanaimo or can bring to Victoria if you'd prefer. Please feel free to message me if you have any questions or want to arrange a time to come by to check it out.]]> Tue, 28 Apr 2026 06:47:47 GMT Facet Purolator FEP12SV 12V Universal Electronic Fuel Pump (New) $125 https://www.bluewatercruising.org/forums/posts.aspx?topic=1852276 https://www.bluewatercruising.org/forums/posts.aspx?topic=1852276 High quality 12 V electronic fuel pump. Bought this one as a spare and never needed it because the original was so reliable! *Comes with optional small inline fuel filter Manufacturers Description: This universal electronic pump fits all carburetor equipped cars, vans, light trucks, boats, generators, farm equipment and throttle body fuel systems. It also is works as a diesel priming pump. The FEP12SV is compatible with leaded and unleaded gasoline, diesel fuel, blended alcohol fuels and fuel additives. This fuel pump is self priming to 12 inches of fuel lift. No extended cranking is necessary to restart engine after running out of fuel. Specs: Type: Cube Volts: 12 Max/Min: 7.0 - 4.0 GPH: 32 Positive Lead: n/a Negative Lead: Ring Fuel Filter Fitting: 1/8 - 27 NPTF Lift Min: 36" Check Valve: N Positive Shut Off Valve: N Price: $125 (costs $150+tax online) Available in Nanaimo, or if preferred can bring it to Victoria. Please feel free to message me if you have any questions or want to set up a time to check it out.]]> Sun, 26 Apr 2026 19:51:30 GMT (New) Windblown MastBoot - Mastboot Tape 48"x5", Black, for up to 40ft boat https://www.bluewatercruising.org/forums/posts.aspx?topic=1852261 https://www.bluewatercruising.org/forums/posts.aspx?topic=1852261 New tube/roll of Windblown MastBoot Tape - self-bonding rubber tape designed to fit the mast of any boat up to 40 ft. Kept this as a spare incase my existing mastboot started to leak and never needed it. Highly reviewed product used by professional yacht riggers. Model: Heavy-duty Black "SUPER self-amalgamating" (stronger than the white) - 5" wide x 48" Manufacturers Description: Leaky mast partners have been a problem forever!! We have found your solution. Very flexible rubber with aggressive adhesive backing, UV stable and durable. 5" wide and 1/10 of an inch thick. Tape is applied bottom up, in a shingle-like manner. Once in place it forms a one-piece custom-fitted boot. When removing the spar, just slit the boot with a knife or razor and peel it away. You can leave existing tape applied as is or cover it. Professional riggers have been using this tape with great success. https://www.rigrite.com/Spars/SparParts/Mast_boot_%20Tape.php Price: $40 (sells for $69 USD + tax online) Available in Nanaimo or can bring to Victoria if you'd prefer. Please feel free to call me if you have any questions or want to set up a time to come by to check it out!]]> Sun, 26 Apr 2026 05:10:22 GMT (New) Rule 2000GPH Bilge Pump 12V (Model 10) - $250 https://www.bluewatercruising.org/forums/posts.aspx?topic=1852257 https://www.bluewatercruising.org/forums/posts.aspx?topic=1852257 Brand new Rule 2000 GPH Bilge Pump (12V Model 10). Bought recently as a spare for a trip and never opened/used. Specs: 12 VDC 1-1/8" discharge Amp draw @ 13.6V - 12.0 Amp draw @ 12.0V - 8.4 Fuse size - 15A Manufacturers Description: Rule submersible bilge pumps have set the standards for the marine industry for decades, and are the choice of yachtsmen and commercial fishermen throughout the world. More innovations in bilge pump design have come from rule industries than any other manufacturer. PRODUCT FEATURES -Exclusive Rule moisture tight seals -Compact, efficient, long-life motors -Easy clean snap lock strainers -Completely submersible -Silent and vibrationless operation -Ignition protected -No burn-out when run dry -Stainless steel shafts -Rust and corrosion protection -Marine-grade blocked wiring -CE and ISO 8849 certification -Meets ABYC specifications -NMMA listed equipment -Traditional operation activated by a float switch and/or panel switch, providing an extra level of security and protection -Remove the motor by pushing the side tabs, allowing easy access to clean the strainer and the impeller cavity https://www.harbourchandler.ca/products/rule-2000gph-bilge-pumps Price: $250 ($299 + tax in store) Available in Nanaimo or can bring to Victoria if you'd prefer. Please message me if you have any questions or want to set up a time to come check it out.]]> Sun, 26 Apr 2026 01:52:32 GMT Spinlock Performance Safety Lines (Tether) - $65 https://www.bluewatercruising.org/forums/posts.aspx?topic=1852235 https://www.bluewatercruising.org/forums/posts.aspx?topic=1852235 Top-of the line lightweight compact safety lines to secure yourself to strong points or jacklines on your boat. 2 clip, 1 loop, stretch DW-STR/3L/C model A two-point tether system is essential for any movement on deck or foredeck. The 1m or 2m tether points allow the wearer to move freely around the boat while always connected to the boat. The shorter length is useful to reduce the falling distance when working in an exposed position or attached to the high side. A loop attached with a cow hitch reduces the weight of the tether on the harness and eradicates any risk of accidental unclipping. A loop confirms a secure attachment when using the tether for long periods of time. Features: -Up to 50% lighter and more compact than conventional safety lines -Easy to use lightweight forged clips with wide opening gate -Webbing "Dry Coated" to reduce water absorption & stay lighter for longer -Overload Indicator -Yachting Australia and World Sailing OSR-compliant -The DW-STR/3L/C is compliant with section 5.02.2 of the Offshore Special Regulations. ALL crew members to have a tether with 3 points of attachment for Category 0,1,2 & 3 races Colour: Blue and Orange Weight: 414g (14.60oz) Condition: Good, no cuts or wear in lines. Always rinsed with freshwater and dried before storage. Price: $65 (worth $140 + tax new) Available in Nanaimo or can bring to Victoria if preferred Please feel free to contact me if you have any questions or want to arrange a time to come by to check them out. ]]> Sat, 25 Apr 2026 03:35:49 GMT Spinlock DeckVest VITO Offshore Racing Lifejacket with HRS (170N) and more! https://www.bluewatercruising.org/forums/posts.aspx?topic=1852234 https://www.bluewatercruising.org/forums/posts.aspx?topic=1852234 Top of the line offshore-grade lifejacket with great accessories. This lifejacket was designed in partnership with the Volvo Ocean Race, and the feedback from racers resulted in them making not only the safest, but the most comfortable lifejacket out there. Fit, light weight and weight-distribution are so good you hardly notice you have it on - was literally designed to be a lifejacket "crews wanted to wear more often". Doesn't impede movement at all and can easily/quickly be swung on or off even over foul weather gear. Lifejacket has a crotch strap that stashes away in an elastic pocket on the back when not in use. Lifejacket has all of the latest and greatest in safety features including: -Hammar automatic Hydrostatic Inflation (replaceable Firing Cap expires in 2029) -Harness Release System (HRS) -reflective / luminescent elements -a spray hood -the Pylon 360 degree light -the MOB1 AIS unit can be fit as an add-on. The Deckvest Vito is approved to the following standards: CE Approved, ISO 12402-3 170N Lifejacket, ISO 12401 Deck Harness, Pylon Light ISO 12402-8 and Sprayhood ISO 12402-8. Size: 170N Buoyancy, one-size fits all Condition: Good. No cuts/damage, never deployed or immersed in saltwater, always rinsed with freshwater and dried before storage. Accessories: -The chest pack accessory gives you such a handy and accessible pocket you'll want to wear the lifejacket, if even just to have such a handy place to stash your phone (it's near water tight), snacks, and even little bits/parts you might need to carry or stash while doing repairs at sail/sea! -mesh hanging/drying bags -Optional: Spinlock Performance Safety Lines (Tether): Top-of the line lightweight compact safety lines to secure yourself to strong points or jacklines (2 clip, 1 loop, stretch DW-STR/3L/C model). Will include if interested for an extra $55. Links to manufacturers descriptions: https://www.westmarine.com/spinlock-deckvest-vito-offshore-racing-lifejacket-with-hrs-harness-release-system-20995601.html https://www.spinlockusa.com/en-GB/usa/products/essentials-packs?sku=DW-PCC https://www.spinlockusa.com/en-GB/usa/products/performance-safety-lines Price: $275 for lifejacket and chestpack (worth $530+$40 + tax new) and an additional $55 for safety lines/tether if interested (worth $140 + tax new) Available in Nanaimo or can bring down to Victoria if preferred. Please feel free to message me if you have any questions or want to arrange a time to come by and check it out.]]> Sat, 25 Apr 2026 03:18:45 GMT New Jabsco PAR-Max HD3 Marine Freshwater Pump - 12V (40psi) - $200 https://www.bluewatercruising.org/forums/posts.aspx?topic=1851651 https://www.bluewatercruising.org/forums/posts.aspx?topic=1851651 Brand new Jabsco PAR-Max HD3 Marnie Freshwater Pressure/Washdown Pump - 12V (40 Psi model) Great automatic water pump. Carried this one as a spare aboard my boat - never needed it so it's brand new, still in box. Manufacturers Description: Jabsco 12V PAR-Max Heavy Duty Marine Freshwater Delivery Pumps are designed to be durable and high performing; providing years of satisfactory service in a variety of marine applications. Features: -Co-Molded TPV technology for long life and durability -Efficient and quiet operation -Heavy duty, motor and cast aluminum lower housing which allows for long-life, even at high pressure -Integrated, sealed pressure switch for on-demand operation -Self-priming allows for installation versatility -Can run dry without damage -Quick connect ports for ease of installation, servicing, and maintenance -Vibration dampening mounting feet -Equipped with integrated bypass module to reduce cycling and provide smoother flow -Plastic housing protects the motors on these units from corrosion -Includes fittings and strainer Specifications: -Voltage range: 9 - 13.6V DC -Open flowrate: 3 GPM (11.3 LPM) -Internal bypass: Yes -Motor design: Brushed, permanent magnet TENV -Upper housing material: Fiber reinforced polypropylene -Lower housing material: Cast aluminum -Diaphragm: Santoprene -Check valves: EPDM -Fluid temperature range: 32° - 140° F (0° - 60° C) -Certifications: CE, ISO8846, RCM Ingress protection: IPX6 Price: $200 (~$240 in store) Available in Nanaimo or can bring to Victoria if you'd prefer. Please feel free to contact me if you have any questions or want to arrange a time to come by and check it out. ]]> Mon, 20 Apr 2026 03:09:25 GMT Scoprega Bravo 1 Foot Pump (new in wrapping) - $40 https://www.bluewatercruising.org/forums/posts.aspx?topic=1851646 https://www.bluewatercruising.org/forums/posts.aspx?topic=1851646 Scoprega's Bravo 1 Foot Pump / Air Pump is the ideal solution for all of your inflation needs. It is able to effortlessly reach the recommended pressure for dinghies, kayaks, life rafts and pool toys. Brand new - bought as a spare and never used. Features: -Reinforced fabric coated bellows -Durable marine-grade construction unaffected by UV or salt water -Stainless steel metal parts -Universal adapter -Inflates/deflates dinghies, kayaks, life rafts, pool toys, etc. quickly and to the required pressure -Portable and easy to transport -Supplied with hose and adapters Specifications: -Dimensions: 26 x 20 x 8 cm -Max pressure: 500 mbar (7.2 PSI) -Volume: 4 L Price: $40 Available in Nanaimo or can bring it down to Victoria if you'd prefer. Please feel free to contact me if you have any questions or want to set up a time to come check it out!]]> Sun, 19 Apr 2026 22:41:12 GMT OceanBrake Jordan Series Drogue (dyneema) with custom accessories $2100 https://www.bluewatercruising.org/forums/posts.aspx?topic=1851635 https://www.bluewatercruising.org/forums/posts.aspx?topic=1851635 Dyneema OceanBrake Jordan Series Drogue (116 cones, perfect for boats up to 20,000 lb displacement) with custom efficient drybag storage/deployment system (as new). Scientifically designed and tested to be the gold-standard device for providing safety against capsize/knockdowns in storms / heavy weather sailing by Don Jordan and the US Coastguard. Put a lot of time and research into purchasing the best available drogue (from OceanBrake in the UK), and components for safe/reliable/efficient deployment and compact storage. Fortunately crossed the Pacific last year without having to deploy it (so it's brand new, always stored in dry bag), but knew if I ever needed it - this was the ideal setup to keep me, my crew and my vessel safe. Includes: -MEC 60L Muskoka Dry Tote (perfect for storage, and easy/safe deployment) -appropriately sized (10kg) 3/8" chain weight -2 new properly sized/rated 3/4" Crosby Shackles to anchor to boat -1 new moused 5/16" Titan shackle to attach chain weight -2 new 1/4" diameter dyneema shackles for securing the drybag in "ready position" at aft of boat -zipties for mousing shackles once secure large shackles to boat -"Mom, I'm Fine" bag containing chain which is sure to make you smile and relax such that you aren't panicking and deploy it properly Condition: Literally as new - all stored in drybag since assembled Manufacturers webpage: https://www.oceanbrake.com Price: $2100 (Components all worth closer to $3000 new and it's all assembled for you) Available in Nanaimo, or am happy to bring it down to Victoria if preferred. Please feel free to contact me if you have any questions or want to come by to check it out!]]> Sun, 19 Apr 2026 20:57:16 GMT SOLD Ivation 13 Pint Desiccant Dehumidifier https://www.bluewatercruising.org/forums/posts.aspx?topic=1851282 https://www.bluewatercruising.org/forums/posts.aspx?topic=1851282 Incredible small desiccant type dehumidifier. Perfect for cool damp spaces where a compressor type dehumidifier won't work (kept my boat smelling fresh and mildew free!). Has a great humidity sensor and can be left on auto-mode at your desired humidity setting draining into a sink or drain. Small enough to put on a counter if desired. Low power draw for a true dehumidifier. Has a 13 pint reservoir with overflow protection too if don't wish to use drain hose. Instruction manual and drain hose included. Condition: Good (only a few minor scuffs)   Manufacturers description: Product Highlights: -Helps prevent odors, mold and mildew -Compact design is perfect for smaller spaces -Works best in cooler temperatures -Auto-shut off prevents overflows -Removable, cleanable filter -Sleep mode operates quietly all night long -Swinging air outlet vent for superior directional control and laundry-drying -24-hour timer -Continuous drainage feature SPECIFICATIONS Operating temperature range: 0.5°C - 40°C Dehumidification: 12 pints/day (20 deg C/60%RH) Water tank capacity: 0.5 gal (1.8L) Power consumption (H/L): 470W/280W Voltage: 120V~60Hz Product size: 10.6" x 6.85" x 17.35" https://www.ivationproducts.com/products/ivaddh06-13-pint-dehumidifier-with-continuous-drain-hose Available in Nanaimo or can bring it to Victoria upon request Please feel free to contact me if you have any questions or want to come by to check it out!]]> Wed, 15 Apr 2026 06:07:37 GMT Mustang Survival MS185 Classic Flotation Suit (Size Small) - $175 https://www.bluewatercruising.org/forums/posts.aspx?topic=1850992 https://www.bluewatercruising.org/forums/posts.aspx?topic=1850992 Mustang Survival Classic Flotation Suit Great high-visibility insulated flotation suit. Has seen some use, but outside of some discolouration, is in great working shape (all zippers, velcro, foam and reflective elements in great shape; no holes, rips, wear spots) Size: Small (chest: 34-38"/86-96cm; weight 45-70kg/99-154Ibs) Manufacturers Description: This flotation suit uses closed-cell foam to provide warmth, comfort, and safety in cold marine environments for sailors, fishermen, and a range of industrial activities. DESCRIPTION Perfect for a wide-range of activities including sailing, fishing and a range of industrial uses, Mustang Survival's MS-185 Classic Flotation Suit is durable, safe and mobile. Delivering warmth and comfort in cold weather environments, the Suit's closed-cell foam provides flotation and in-water insulation to delay the onset of hypothermia in the event of water immersion (Immersed Clo = 0.420). The suit features functional essentials including SOLAS tape for visibility and large front cargo pockets for storage. Considered by many to be one of Mustang's best-valued suits, and durable enough for industrial and regulatory environments, the Classic Suit is a standard piece of uniform for many government agencies.Mustang Survival flotation suits are designed to protect the wearer from foul or cold weather, and use closed-cell foam to offer flotation and hypothermia protection in the event of water immersion. Tug-Tite® technology and Velcro™ wrist and ankle closures improve fit and limit water flushing if immersed, SOLAS reflective tape enhances visibility and an insulated hood is easily stowed in the collar for convenience. FEATURES Approval: TC Marine - CAN/CGSB 65.11 - Adult PFD Hypothermia and flotation protection in a 1-piece suit Immersed Clo 0.420 Designed for used in a range of industrial and recreational environments Tug-Tite® at thighs for improved fit and minimized water flushing Velcro™ closures at wrists and ankles for fit and to minimize water flushing SOLAS reflective tape for enhanced visibility Insulated hood folds into collar Price: $175 (worth ~$500 + tax new) Available in Nanaimo, or can bring to Victoria if preferred. Please feel free to contact me if you have any questions or want to set up a time to come by and check it out!]]> Mon, 13 Apr 2026 01:49:32 GMT Spare Inflatable Boat Halfturn Oarlock - $20 https://www.bluewatercruising.org/forums/posts.aspx?topic=1850463 https://www.bluewatercruising.org/forums/posts.aspx?topic=1850463 Spare Inflatable Boat Halfturn Oarlock. A little worn, but a great spare part to have as a backup incase you need to replace one while on a trip. Fits the following inflatable dinghys: -All Zodiac Cadets -West Marine Zodiacs from 1999-present -Bombard AX & Typhoon Series -Zoom brand -Yachtline -RIB Aluminum -Wave Series 275 / 310 (2013 & Newer) Specifications: Color: Gray Pin Diameter: 12 mm Fits Oar Shaft Diameters: 35 mm Price: $20 (worth $60+ each new) Available in Nanaimo or can bring to Victoria Please feel free to message me if you have any questions or want to arrange a time to check it out and/or pick it up.]]> Tue, 7 Apr 2026 03:58:28 GMT Schaefer Series 3 Furling Blocks - $320 https://www.bluewatercruising.org/forums/posts.aspx?topic=1719894 https://www.bluewatercruising.org/forums/posts.aspx?topic=1719894  

Set of 8 Schaefer Series 3 stanchion and pulpit furling blocks. 

Schaefer furling blocks offer unique, smooth and reliable solutions for all furling systems. Simple clamp on design adapts to 1"-1-1/4" stanchions easily and features a delrin(tm) ball bearing. The clever clear step blocks lead your furling line outside of the stanchions to clear the deck. 

On Amazon or Ebay for about $80CDN each, not including GST and PST! Selling the lot of 8 for $320.

 
]]> Sat, 17 Dec 2022 05:01:21 GMT Cooke sextant https://www.bluewatercruising.org/forums/posts.aspx?topic=1801512 https://www.bluewatercruising.org/forums/posts.aspx?topic=1801512 Wed, 20 Nov 2024 22:30:59 GMT Volvo Penta MD2030 Marine Diesel Engine for Sale https://www.bluewatercruising.org/forums/posts.aspx?topic=1842017 https://www.bluewatercruising.org/forums/posts.aspx?topic=1842017 $3500
2800 hrs  - well maintained and reliable
includes control panel, 60 amp alternator and shop manual

Spare alternator and fuel/lift pump also available.

currently installed in sailboat and available for test running until march 2026
detailed maintenance records available 

 

]]> Mon, 19 Jan 2026 01:02:23 GMT NEW! NOVA KOOL icebox conversion kit LT-201 $795 obo https://www.bluewatercruising.org/forums/posts.aspx?topic=1781351 https://www.bluewatercruising.org/forums/posts.aspx?topic=1781351 Fri, 31 May 2024 05:02:27 GMT